YaST2 - Network Settings
Global Options
IPv6 Protocol Settings - Enable IPv6 (uncheck)
DHCP Client Options - Change Default Route via DHCP (uncheck)
Overview - Edit - Statically Assigned IP Address
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0 或 /24
Hostname: member.dlinkddns.com
Hostname/DNS - Hostname and Domain Name
Hostname: member
Domain Name: dlinkddns.com
Routing
Default IPv4 Gateway: 192.168.0.1
Device: eth0
$ su
$ gedit /etc/hosts
192.168.0.100 member.dlinkddns.com
$ gedit /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='static'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR='192.168.0.100/24'
MTU=''
NAME=''
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
DHCLIENT_SET_DEFAULT_ROUTE='yes'
PREFIXLEN='24'
$ gedit /etc/sysconfig/network/ifroute-eth0
default 192.168.0.1 - eth0
以上设置完后, 要改一改 resolv.conf
$ gedit /etc/sysconfig/network/config
NETCONFIG_DNS_STATIC_SERVERS="192.168.0.1"
$ netconfig update -f
看看 resolv.conf, 会多出一行
$ cat /etc/resolv.conf
nameserver 192.168.0.1
没有评论:
发表评论